BK-Electronics
The Warrior ESCs are placed at the lower and
middle price segment. The controllers can drive all 2 to 6-pole motors.
LRK motors can only be used together with the PC connection (as well
as some other motors too) - they do require a change of the timing. The
timing can be adjusted in fine steps of 0-30 degrees. The ESCs have a
proportional brake and feature the following data:- shrink tube housing (incl. large heat sink)
- integrated BEC for up to 10 Nixx cells (3S Lipo)
- useable amount of Lipo cells: 2-6 (above 3 cells without BEC)
- useable amount of Nixx cells: 6-20 (above 10 cells without BEC)
- max. power: 70-150 ampere (depending on version)
- Lipo voltage cutoff is fixed at 2,7 volt per cell
- easy radio setup
- optional PC connection (RS-232 cable incl. software (separately available))
- measurements: 80 x 35 x 12-20mm (3.15x1.38x0.47 - 0.79", depending on version)
- weight: 85 - 120 gramm (0.19 - 0.26 lb, depending on version)
Of course, all other versions of the Warrior series and further ESCs from this manufacturer can be delivered too.
For questions about the choice of the power system just send one e-mail containing the own ideas to the following address: info(at)ace-cars.info
(Please replace the (at) with the appropriate internet symbol)